When wiring a ceiling fan what is the blue wire

This can create some confusion when it comes to which wires to connect together. Expert: Mark Sullivan Bio: Mark. Not excited about pulling down the . The blue wire from fan is now being used buy the wireless receiver . Absolutely do not leave the wires alone wrapped in electrical tape.

The polite thing to do for your future self or future owner of .

If you want the fan and light to operate separately, then connecting the wires as you described is the way to go.

As for the green grounding wire , simply attach it to the green grounding wire in the . As with any other electrical device, remember to . Learn how to wire your ceiling fan correctly and safely in this free video clip. Finn III Bio: George Finn is an expert in mechanical syste. Match the black wire and the blue wire from the ceiling fan to the black ceiling junction box wire. There should be two white wires from the ceiling fan kit and one from the box. Finally, connect the red wire from the electrical box to the remaining wire from the ceiling fan.

This wire is commonly red or blue but almost . Keep in mind that some manufacturers may use different colors for the fan and . You should have capped it, or connected it to either the black or blue from the ceiling fan only. The remote receiver takes power from the switch (black and white input leads), and outputs power to the light ( blue output lead), the fan (black output lead), or both. With the black wire from the ceiling connected to . The instructions that came with the fan will tell you exactly what wires to connect to what. From the controllers, 3- wire cable runs to the ceiling outlet box. The black wire is splice to the output on the speed controller and to the black, fan wire at the other end.

The red wire is spliced to the output on the dimmer and to the blue , light wire at the other end. The neutral from the source is spliced in the switch box with the . The chain to my 3-speed fan switch broke inside the switch. Connect all ground and greens together. One of the black and white wires goes to the light fixture. The other black and white wires are the electrical circuit for the switch.

The wires running from the box in the ceiling need to be matched up with the two green wires , and ground wires coming from the fan need to be spliced to the bare ground wire. Another useful application is the. These wires are usually pulled in conduit. Follow the steps as you see joe wiring up a.