Sharp tv blinking green light

On sharp LCDs, that indicates some sort of power issue, or power supply issue. My power button and OPC button is flashing at the same time. My sharp aquos LC-24LE155M wont turn on. The power light just blinking red.

Try unplugging the unit and while unit is unplugged hold the volume up button and channel down buttons down and while depressing both buttons plug the unit in.

Let go of the buttons and the unit should come on in the service mode.

With the sharp remote press the .

Fixing LED LCD TV service repair guide for Sharp Aquous LC-70LE and LC- 60LE models factory reset. Note lowering the LED backlight brightness and firmware update may help but if . ShopJimmyTV Sharp LC-32D44U Sharp LC-3. From the right side of TV control buttons, push the INPUT and VOLUME DOWN buttons and plug in TV to the outlet, all at the same time. TV will turn ON, but it has snowy screen.

Got the new board from eBay for $55. SHARP LC- 37X20E LCD TV little while screen lights up only slightly blue. Sharp LCD TVs and enter SERVICE MENU, unplug tv hold buttons input and vol.

K popup should appear then press together ch- and vol- to enter service menu, or also try press menu 2. When you have the OPC turned on, the OPC LED turns green. I have tried reset the tv and nothing happens. A flashing OPC LED is an alert that something is wrong with your Aquos television. Sharp Aquis LC 30Hv4U problems turning the light on from red to green , is it the power supply. Lights till blinking green and red.

To fix the no picture, blinking power light ( green ) proble1. I get the flashing green Lamp indicator on the power button on the TV which is normal. It just sits there flashing the green Lamp indicator for about 1. How to fix Sharp Aquos TV blinking red and black screen, steps to reset. One short blink , then one long.

Hold volume down, channel up, and power, and it will turn on and work like normal. I did notice sometimes the backlight would flash during use, but it was fast and not very often. Service manual is here to diagnose blinking problems. U get power on light stable right? This is very common in sharp tvs.

Sometime POWER light and OPC light flashes?