My sharp aquos LC-24LE155M wont turn on. The power light just blinking red. On sharp LCDs, that indicates some sort of power issue, or power supply issue. I suspect the tv may need to be reset.
If so, do you know how this is done?
Please help me fix this problem.
Note lowering the LED backlight brightness and firmware update may help but if .
This has the blinking light problem. One short blink , then one long. Hold volume down, channel up, and power , and it will turn on and work like normal. I did notice sometimes the backlight would flash during use, but it was fast and not very often. Service manual is here to diagnose blinking problems.
Sharp LCD TVs and enter SERVICE MENU, unplug tv hold buttons input and vol. K popup should appear then press together ch- and vol- to enter service menu, or also try press menu 2. I do about both power and opc lights blinking and no picture or sound. Look up your model number on the Sharp website and look for error codes.
Example, blinks could mean faulty power , . When you have the OPC turned on, the OPC LED turns green. A flashing OPC LED is an alert that something is wrong with your Aquos television. Call sharp aquos back, and wait on hold.
Had the same exact problem on the same exact TV. Sharp aquos power light blinks repair Lc-60le640u. The screen recently went black. Sharp Aquos Blinking Red Black screen, Fixed - Duration: 4:10.
You can go from there depending on what happens. Are any of the lights flashing a code? Hello, I just wanted to turn my tv on from standby mode and the standby light disappeared and the tv isnt giving any signs of life.
I did the power button then plug back in.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.