Grounding is an integral path for home wiring also because it causes circuit breakers to trip more quickly (ie, GFI), which is safer. Household wiring does not usually use three-phase supplies and the clash only occurs in three- phase systems. The longer slot on the left gets the neutral (white) wire (s) . Conductors connected to this reference point ( Neutral ) shoul normally, be non current carrying conductors, sized to handle momentary faults (short circuits) occurring in. The size of the current flowing depends on the potential difference ( voltage) .
The two 1volt wires are obtained by grounding the centertap of the transformer supplying the house so that when one hot wire is swinging positive with respect to groun the other is swinging negative.
All the current that comes from the hot leg returns through the neutral wire.
In the USA, residential ground wires . UK Wiring Colours – The Old and the New. Have you checked the colours of the wiring in your home ? Are you planning on rewiring your home or taking some electrician courses? I am giving you my version of what the neutral wire does in your main electrical panel in your house going back to the transformer.
Many appliances have transformers to isolate the current. So the convention is that the neutral is grounded somewhere. The ground is all around and cannot be avoided. North American standards state that the neutral is neither switched nor fused except in very narrowly defined circumstances.
The neutral is connected to the center tap of the power . DIY Network experts offer tips on how to identify the wiring in your house. Power comes from the service panel along the black (hot) wire through other outlets, switches, and light fixtures on the circuit and begins its return to the source through the white ( neutral ) wire attached to this outlet. The bare (hopefully) solid copper wire is the ground.
The service drop from the home to the power pole has three wires , however one is uninsulated because it is the ground conductor. One wire is called the live wire, as illustrated in Figure 28. The potential difference between these two . Canada: Canadian wiring is governed by the CEC (Canadian Electric Code). The protective ground is green or green with yellow stripe. Three-phase lines are re black, and blue.
The hot and neutral wires are interchangeable as far as the equipment is concerned. One of the power carrying wires is grounded at the source for reasons of safety (see the appendix: the origin of the 3-wire system). The only reason why the two wires are differentiated (hot vs. neutral ) is to .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.