Ceiling fan blue white black wire

This can create some confusion when it comes to which wires to connect together. The ceiling fan would have four wires ( blue is common color for the 4th wire ), and they are normally labeled Light, Fan, Common, and Ground. One wall switch will control the black wire , and the second switch . Expert: Mark Sullivan Bio: Mark. Not excited about pulling down the .

Wiring Connections for the Ceiling Fan Blue Wire.

What wires get connected to what wires ?

This electrical wiring question came froGreg , a Homeowner from Sarasota, Florida. As with any other electrical device, remember to . The black wire is splice to the output on the speed controller and to the black , fan wire at the other end. The red wire is spliced to the output on the dimmer and to the blue , light wire at the other end.

The neutral from the source is spliced in the switch box with the white wire , and to the neutral wire on the ceiling fixture at the . The instructions that came with the fan will tell you exactly what wires to connect to what. Most common electrical cables include three conductors: a black wire to carry the hot fee a white wire for the. My ceiling fan comes with black , white , green, and blue. Follow the steps as you see joe wiring up a. Yellow and blue electrical wires are also used to carry power but are not for wiring the outlets for common plug-in electrical devices. White is the color most often used for this function.

Keep in mind that some manufacturers may use different colors for the fan and . If you want the fan and light to operate separately, then connecting the wires as you described is the way to go. As for the green grounding wire , simply attach it to the green grounding wire in the . Match the black wire and the blue wire from the ceiling fan to the black ceiling junction box wire. This enabled me to separate the light and the fan for light dimming and fan speed control.

Cap off the black and white wire from . Yes, it's definitions possible that the black with white stripe is the same as blue. Connect the red wire from the ceiling to the black wire in the fan. Though you might find that the black is blue , and the black with white stripe is black.

Ceiling fans with lights typically have four wires : black (fan hot), blue (light hot), white (neutral), and green (ground). CONNECT WIRES FROM RECEIVER TO FAN - Using the orange wire connectors, connect the blue wire from the receiver to the blue wire (or possibly black with white stripe wire ) from the fan.