Hello, I just wanted to turn my tv on from standby mode and the standby light disappeared and the tv isnt giving any signs of life. My LC60LE64OU SHARP AQUOS TV WAS TURNED ON BRIEFLY THEN IT TURNED OFF INDEFINITELY WITH THE POWER BUTTON FLASHING. My sharp aquos LC-24LE155M wont turn on. The power light just blinking red.
This has the blinking light problem.
One short blink, then one long.
Hold volume down, channel up, and power , and it will turn on and work like normal.
I did notice sometimes the backlight would flash during use, but it was fast and not very often. Service manual is here to diagnose blinking problems. Sharp hd tv repair fix lc42sb456u will not turn on. I have lc40e77un there is no pic on the tv and the green and red led turn on and off randomly. Sharp LCD TVs and enter SERVICE MENU, unplug tv hold buttons input and vol.
These sets accumulate lamp error codes, so just zeroing them out of the register and resetting the set will NOT permanently fix the set. TV will turn ON , but it has snowy screen. Sharp Aquos LED TV - Model LC70LE632U - Blinking Lights Pro.
HOW TO FIX SHARP LCD TV LC- no audio, no video, no hdmi input signal, no power , common easy tv repair service review guide. The light turns from red to green but no tv. On sharp LCDs, that indicates some sort of power issue, or power supply issue.
I just moved and set the tv back up and it worked fine for the first hours. I tried the factory reset procedure and was able to reset it, unplugged and waited 30sec and plugged it back in. Make sure the TV is actually turned on before you freak out. Got the new board from eBay for $55.
When you have the OPC turned on, the OPC LED turns green. A flashing OPC LED is an alert that something is wrong with your Aquos television. My tv suddenly started flashing red no clue what happened tried to check the power board and the high tension board but no use.
Would the tv show signs of led problems before it goes?
No comments:
Post a Comment
Note: only a member of this blog may post a comment.