Each pin must be correctly connected to the three wires in the electrical cable. Each wire has its own specified colour so as it can be easily identified. Remove the plug cover by either snapping or unscrewing it.
There is an easy way to remember where to connect each wire. Take the second letters of the words blue, brown and striped.
This reminds you that when you look into a .
DIY elictrical projects, Crafty Corner,.
To start connecting your plug , first loosen the screw in the centre of the plug that holds it together by using your Phillips (star) screw driver. Strip the end of the thick cable coming from the appliance into the plug , using wire strippers. Take off roughly of white covering,.
Most accidents with electricity in the home are caused by faulty or incorrectly wired plugs. Inside the plug are three terminals: Earth : This is where the green and yellow wire goes - however, double insulated appliances do not have an . At 2:surely the cable is meant to be under the captive washer? Here in the UK this type of plug has not . A - pin plug consists of three pins (hence the name). The - pin plugs are designed so that electricity can be supplied to electrical appliances safely.
Blue (neutral) and brown (live) can be connected either way around. It will also teach you the correct plug wire colours to use. Australian - Pin Electrical Mains Plug. Standard - pin earthed power outlets are rated at 10Amps and are usually switched.
Joined: for malaysian wiring colour code. I always do that for three pin plugs :P. Cut off the 2-pin plug at the end of the cable. The heat for the appliance is provided by gas.
Now when you do this, do not press too hard with the blade else you will end up cutting the plastic wire casings inside the cable and thus you will need to strip off more of the cable casing again.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.