Hz, 75°C (167°F) — Three Single. Direct-Current Resistance at 75°C ( 167°F). CM” = Circular-Mils: The circular mils of the circuit conductor as listed in Chapter , Table 8. As the adoption and use of the NEC has increased in areas of the world.
The NEC lists the resistance and area in circular mils for both dc and ac circuit conductors.
CM = The circular mils of the circuit conductor as listed in NEC Chapter , Table .
The tables include both solid and stranded con- ductors.
What is the approximate voltage drop of the feeder circuit conductors? Size, Conductors, DC Resistance at 75C (167F). AWG or kcmil), Area, Stranding, Overall, Copper, Aluminum.
Qty, Diameter, Diameter, Area, Uncoate Coated. The maximum allowable fill for new conduit is full. In addition, the NEC has five rules that required conductors be sized to accommodate the voltage drop of the circuit conductors.
The Q adjustment factor is determined by dividing alternating current resistance as listed in NEC Chapter , Table , by the direct current resistance as listed in Chapter Table 8. Engineering Design as Related to Cable Applications. The data in this chapter provide the application engi- neer with certain formulas and tables that can be used to advantage when selecting cable for ordinary uses. It is assumed that he has available the iatest National Electrical. The rows going across is the size of the conduit and the type.
The columns going down shows the gauge of wire that is being used. The are the numbers of wires of that gauge, that can be run through that size, of that kind of conduit such as EMT, IMC, and galvanized pipe. So why is it there and what use is it to you? This Chapter provides useful tables. L : The length of conductor (m).
CM = Circular-Mils: The circular mils of the circuit conductor as listed in NEC Chapter , Table 8. Article 3- Electrical Metallic Tubing (EMT). Q” = Alternating Current Adjustment: Alternating current circuits No. XP Seals, Percent Fill, XP Seals, Short Nipple.
Lookup tables , 8- Excel spreadsheets.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.