Most common electrical cables include three conductors: a black wire to carry the hot fee a white wire for the. The black wire is the hot wire and leads back to the wall switch. The white wire , known as neutral, completes the electrical circuit.
The bare copper wire is the ground wire. If you have two toggle switches on the wall that operate the ceiling fan motor and light separately, you should have an additional red wire inside the box.
Generally there are two colored current carting conductors, red and black.
Check the instruction sheet or one from the same maker.
The blue wire from fan is now being used buy the wireless receiver. One is for the fan and other light. How lift the assembled ceiling fan kit mounting bracket, and hang canopy from hook . Another option for people who prefer to turn the lights on when they first walk in the room would be to connect the red wire from the ceiling to the blue wire that goes directly to your fan (this of course will not allow you remote to work for the light).
Learn how to wire your ceiling fan correctly and safely in this free video clip. Finn III Bio: George Finn is an expert in mechanical syste. In the original installation one switch would energize the red wire causing the fan to come on, while the other would energize the black turning on the light.
Connect the white wire from the ceiling to the white wire on the input side of the remote receiver module and the white wire in the fan. INSTALL the ceiling fanthe installation never took placechange your title or finish the video. The most common home wiring uses non-metallic sheathed cable with three wires in it: black, white and bare.
Pull chains operate both the ceiling fan light and the fan blade motor. Sometimes there are separate light and ceiling fan switches installed in the wall. Flip off the circuit breaker controlling the wall switch in the room. Match the black wire and the blue wire from the ceiling fan to the black ceiling junction box wire. The ceiling fan would have four wires (blue is common color for the 4th wire ), and they are normally labeled Light, Fan, Common, and Ground.
One wall switch will control the black wire , and the second switch will control red. How to Install Ceiling Fans and Make the Wiring Connections. From the controllers, 3- wire cable runs to the ceiling outlet box. Black and red wires in the cable are used for “hot” wires and the white wire is used for “return” or “neutral”. The red wire is spliced to the output on the dimmer and . Just hook up the white wire from the switch like the red shown here.
The colors for the fan wire and the light wire on this diagram may not be the same as your fixture. In this configuration you must have the switch on to use either the light or the fan.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.