International plumbing code

It sets minimum regulations for plumbing systems and components to protect life, health and safety of building occupants and the public. The IPC is available for adoption by . The BookReader requires JavaScript to be enabled. Please check that your browser supports JavaScript and that it is enabled in the browser settings.

You can also try one of the other formats of the book.

The provisions of this chapter shall govern the general regulations regarding the installation of plumbing not specific to other chapters.

Plumbing shall be installed with due regard to preservation of the strength of .

Provides minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new innovative products, materials, and systems. Municipalities, including Alabama, Colorado,. Delaware, Florida, Michigan, New Hampshire,. North Carolina, Ohio, Oklahoma, Pennsylvania,.

FIXTURES, FAUCETS AND FIXTURE FITTINGS. This chapter shall govern the materials, design and installation of plumbing fixtures, faucets and fixture fittings in accordance with the type of occupancy, and shall provide for the minimum number of fixtures for various . Cleanouts shall be installed in the storm drainage system and shall comply with the provisions of this code for sanitary drainage pipe cleanouts. Exception: Subsurface drainage system. Only potable water shall be supplied to plumbing fixtures that provide water for drinking, bathing or culinary purposes, or for the processing of foo medical or pharmaceutical products.

Unless otherwise provided in this code , potable water shall be supplied to all plumbing fixtures. Ignorance of the law shall not excuse noncompliance and it is the responsibility of the citizens to inform themselves as to the laws that are enacted in the United States of America and in the states and cities contained therein. A wide selection of support references developed by code experts will assist designers, inspectors, plans examiners, contractors, installers, instructors, students and . A list of links to free building codes and standards used by architects, engineers, and construction professionals.

It is important to refer to the. Mastering code compliance has never been so easy! Link to International Plumbing Code Home Page.

The vertical distance from the fixture outlet to the trap weir shall not exceed inches (6mm), and the horizontal distance shall not exceed inches (6mm) measured from the centerline of the fixture . Important changes include: Updated table for the Minimum Number of Required Plumbing Fixtures. The most widely adopted plumbing code in the United States is the International . For the most current adoptions details go to International Code Adoptions.