Fuse wire fuse box

My fuse box is the old style with fuse wire. Find information on the main switch, fuses and circuit breakers, and residual current devices in our handy guide. Modern Cartridge Fuses – Used in plugs and modern fuse boxes.

Always check you have the correct rating for your appliance or system. Older Wire Fuses – These use wire .

The fusebox is the engine of your electrical installation.

It protects all the different circuits from overloading the wiring and causing major problems.

Often these old wired fuses are found . The next step is to turn off the electricity to the fuse box using the mains switch. Then open or take off the cover of the box. Take out each fuse in turn to see which one has blown. This will be apparent by the break in the fuse wire that runs across the fuse. I have replaced all my rewirable fuses with plug-in circuit-breaker switches but retaining the original fuse box at, I guess, a much lower cost than changing the box.

Average cost of upgrading to rcd fuse box. The quotes exclude any additional earth bonding, separating circuits or any other substantial wiring work. This type of fusebox was common in the UK, and there are plenty still in use.

The box pictured top-right is a Wylex standard fitted with rewirable fuses. These boxes can also be fitted with cartridge fuses or miniature circuit breakers (MCBs). Old electric services will have fuses , and old electric services can have problems. This is why people get scared of fuses. A typical amp fuse box might have one 2volt circuit for an air conditioner or electric range, plus four more fuses for the rest of the wiring in . First ensure the consumer unit is switched off.

The fuse wire is held in place by two screw terminals at the top and bottom of the fuse carrier. Unscrew these terminals but do not remove the screws. Then remove the blown fuse wire from the holder.