The flashing Status light on the front ofyour router indicates that it is operational. Itdoes not show whether the router has been configured or not, so itmay still be necessary to set up Internet or wirelessconnectivity. Unlike your quiet LAN, the WAN link between the modem and your router is constantly being flooded with traffic (mainly the CMTS trying to locate different IP addresses).
Modem connection to the cable provider is established. I have Internet-Wi-Fi and everything seems to be working OK.
But the LINK light on my Modem is blinking orange?
I have tried powering down and reseting everything and no help .
First, your modem may need to be reset. To reset, press the reset button on the back of the modem. If this light continues to blink green, contact Tech support. Message LED - This light remains dormant when connected to PowerGate. Cable Link - Indicates your cable modem is connected with PowerGate SOLID.
PC Link - Indicates that you have connectivity . Information is communicated by whether the lights are on, off or flashing. The procedures in this chapter assume that you are troubleshooting an initial cable modem installation, that the HFC network to the installation site is active, that a. If the light pattern matches: Power – Solid. The ARRIS TM822G modem provides high-speed Internet access and supports the use of up to two Optimum Voice lines. Blink =Cable Activity Off=No Activity. My internet still works fine, I was just wondering what this means?
Off, Flashing , Solid Green, Solid Blue, Solid Amber. Forum discussion: Hello, my problem is very simple my internet went out last Thursday around 12pm and came back on sometime late Friday and with that my modems link led is now flashing all the time. The DWL-6has an indicator or link light that can give youinformation about your network traffic and help you determineproblems when troubleshooting. Solid Light - A steady green light indicates agood connection with the network.
Blinking Light - A steady flashing indicates thatthe adapter is scanning for an available . Earlier today the Link button was Blue. You can find out whether you have an issue with your wiring by viewing the lights on the DSL modem. It should flash for about seconds for your DSL modem to . A blinking green DSL light is temporary and normal. Unplug the power cord from the back of the Westell modem. The Link LED lights up green when the Cable Modem is connected to your computer or network through the Ethernet or USB port.
It flashes when there is activity on the Ethernet or USB port. The Online light indicates that you have Internet service. When you turn on your modem , the lights will blink until your Internet connection is ready to use.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.