Before the change, dryers used 3-prong cords that plugged into 3-slot electrical outlets (receptacles). The old cords had 3-prong plugs that fit 3-slot . Newer homes are now being equipped with 4-prong dryer cord plugs. This is the new standard and is required under Article 550.
Shop our selection of Dryer Cords , Appliance Cords in the Electrical Department at The Home Depot.
Plug the dryer into the outlet.
The 3-Wire Configuration is generally found at older homes.
The 4-Wire Configuration has been . Grounding reduces the risk of electrical shock by redirecting an electrical current away from the appliance in the event of an electricity surge. Wire Dryer Cord 10ft Electrical Replacement Power Cords Prong 30A AWG Plug. We do our best to process as quickly as possible.
Canceling your order We are able to cancel orders only at the . Find 3-wire and 4-wire range replacement cords to match the make and model of your range. Dryers: Shop for dryer cords for your electric dryer, so all your laundry comes out fresh and warm this winter season. Specialty Cords for Old Applicances: Look for . There was no ground slot on the outlet, and dryer cords had no ground wire or ground prong. The ground for the appliance itself was connected to the neutral wires. If your electric dryer outlet and cord are getting hot but your dryer is not, it may be because of loose electrical connections.
The left terminal connection had this problem. Always remember safety is the number one thing. DO NOT connect the ground wire to the grounded (neutral) conductor, as this could lead to current flowing through the body of the dryer (and potentially through you). What you are doing is done all the time, and there is no problem with it, if done properly.
Amp Dryer Cord is compatible with free standing electric dryers. This comes with terminal end cord clamp to relieve strain on terminal. It has molded-on, right angle plug to keep cord close to wall. Looking at the cord end without the plug , the left and right wires are the hot wires and the middle wire is the neutral.
The connections on your dryer should have three connection terminals. Left is hot - middle is neutral - and . They take you from stripping the wire to making the electrical connections.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.